Verified EV diagnostic knowledge page

Hyundai P0748

For the cited Hyundai transmission bulletin, DTC P0748 / P074800 is identified as a pressure control solenoid (PC) DTC. The supplied evidence applies to certain U.S. 2016–2020 Hyundai Kona and Sonata vehicles.

DriveNot yet established by verified evidence.
ChargeNot yet established by verified evidence.
ServiceService is not explicitly classified as required in the supplied diagnostic record. However, the verified Hyundai bulletin directs technicians to use the appropriate TSB or shop manual procedure when P0748/P074800 is found.
Confidence95%

Evidence snapshot

Verified sources1
Affected models1
Model years2016–2020
TSB / bulletin sources1

Last evidence review: 2026-09-24. Applicability is shown only where a model relationship is supported by evidence.

Quick answer

For the cited Hyundai transmission bulletin, DTC P0748 / P074800 is identified as a pressure control solenoid (PC) DTC. The supplied evidence applies to certain U.S. 2016–2020 Hyundai Kona and Sonata vehicles.

This page separates verified manufacturer/regulator evidence from supporting material. Unsupported causes, repairs or safety conclusions are not guessed.

Video guides

Watch Videos

Relevant videos play here without leaving this diagnostic page.

Hyundai Accent 2014 with code p0748 pressure control solenoid valve (vfs)A electrical fault solvedMiami Automobile
NZ DIAG! KIA/HYUNDAI TRANSMISSION STUCK IN LIMP MODE?! CHECK THIS FIRST! P0753, P02709, P0748NZ DIAGNOSTICS
P0748 ecm repair MEG17.9.12 hyundai accent #shorts #ecmrepair #P0748 #carhospitalCar Hospital

Videos are supporting material and never override OEM or regulator evidence.

1. What does Hyundai P0748 mean?

For the cited Hyundai transmission bulletin, DTC P0748 / P074800 is identified as a pressure control solenoid (PC) DTC. The supplied evidence applies to certain U.S. 2016–2020 Hyundai Kona and Sonata vehicles.

2. Technical explanation

The verified NHTSA-hosted Hyundai manufacturer communication 20-AT-001H lists P0748 and P074800 under transmission solenoid DTCs and describes them as “Pressure control solenoid (PC).” The bulletin directs technicians to record and erase the DTC, then refer to the appropriate TSB or shop manual and follow the repair procedure when a listed solenoid DTC is present. The supplied evidence does not establish a specific failed component, wiring fault, or repair for every P0748 occurrence.

3. What system is affected?

Automatic-transmission pressure control solenoid (PC), based on Hyundai bulletin 20-AT-001H.

4. How serious is this code?

Not yet established by verified evidence.

5. Hyundai P0748 symptoms you may notice

Not yet established by verified evidence.

6. Possible causes of Hyundai P0748

  • A pressure control solenoid (PC) DTC is identified by the verified Hyundai bulletin. A specific underlying cause is not yet established by verified evidence.

7. Can I drive with Hyundai P0748?

Not yet established by verified evidence.

8. Can I charge with Hyundai P0748?

Not yet established by verified evidence.

9. What you can safely do

  • Record the DTC before it is cleared.
  • Have a qualified Hyundai service technician consult the appropriate Hyundai TSB or shop manual procedure, as directed by bulletin 20-AT-001H.

10. How to troubleshoot Hyundai P0748

  1. The verified bulletin instructs technicians to check for DTCs, record the DTC, and delete the DTC.
  2. If P0748/P074800 or another listed solenoid DTC is found, the bulletin directs use of the appropriate TSB or shop manual repair procedure.
  3. Further diagnostic steps for P0748 are not provided in the supplied evidence.

11. When to contact service

Service is not explicitly classified as required in the supplied diagnostic record. However, the verified Hyundai bulletin directs technicians to use the appropriate TSB or shop manual procedure when P0748/P074800 is found.

12. What the service center may check

  • Check for and record DTCs.
  • Clear the DTC as directed in Hyundai bulletin 20-AT-001H.
  • For P0748/P074800, refer to the appropriate Hyundai TSB or shop manual and follow its repair procedure.

13. Possible repair or resolution for Hyundai P0748

  • Not yet established by verified evidence. The supplied bulletin does not provide a specific repair for P0748/P074800; it directs technicians to the applicable TSB or shop manual.

14. Affected vehicles

15. Related TSBs / service bulletins

  • Hyundai manufacturer communication 20-AT-001H, published January 2, 2020 and hosted by NHTSA as MC-10170899-0001. It lists P0748/P074800 as a pressure control solenoid (PC) DTC and directs technicians to the appropriate TSB or shop manual when a listed solenoid DTC is present.

16. Recall information

No recall relationship is established by verified evidence.

17. Official manufacturer information

Verified source coverage for this diagnostic is listed below. Open the cited document for the full manufacturer or regulator context.

19. Hyundai P0748 frequently asked questions

What does Hyundai P0748 mean in the supplied evidence?

Hyundai bulletin 20-AT-001H identifies P0748/P074800 as a pressure control solenoid (PC) DTC.

Which vehicles are included in the supplied applicability data?

The supplied applicability records cover U.S. 2016–2020 Hyundai Kona and U.S. 2016–2020 Hyundai Sonata vehicles.

Does the supplied evidence identify the exact repair?

No. It directs technicians to the appropriate TSB or shop manual and does not establish a single specific repair.

20. Sources & verification

ReferenceVerified

Evidence sources: 1 · Page reviewed 2026-09-24 · Editorial & quality policy