Home / EV brands / Hyundai / Kona BEV model family
Hyundai Kona error codes and diagnostics Diagnostic coverage for model years 2021–2025. Verified entries below are linked to this model family by source-backed applicability evidence; model membership alone is never used to invent a code relationship.
Powertrain BEV
Model years 2021–2025
Verified diagnostics 77
Evidence status Verified
Verified Verified Hyundai Kona diagnostic codesShowing 1–35 of 77 verified records for this model. Each result opens a manufacturer-specific report with the code meaning, affected vehicles, source evidence and the full diagnostic knowledge page where available.
B1621 For the applicable 2018–2019 Hyundai Kona and Sonata in the US, DTC B1621 means “ECU Defect/Error.” Hyundai’s referenced service communication directs technicians to replace the wireless charger pad when this code is found. · 2018–2019 View diagnostic report → C1112 Verified diagnostic record · 2016–2019 View diagnostic report → C1259 Verified diagnostic record · 2016–2021 View diagnostic report → C1260 For Hyundai vehicles covered by the supplied evidence, C1260 is identified as a steering-angle-sensor signal error. The documented procedure is to reset steering-angle-sensor calibration; if the DTC returns, inspect wiring and connector condition. · 2016–2021 View diagnostic report → C1261 C1261 is identified in Hyundai manufacturer communications as a zero-setting error. The verified procedure is to erase the DTC, inspect wiring and connector condition, and replace the column and housing assembly if the DTC returns. · 2016–2021 View diagnostic report → C1290 Verified diagnostic record · 2016–2021 View diagnostic report → C1603 For the Hyundai applications supported by the verified TSB evidence, C1603 is an MDPS (motor-driven power steering) thermal-protection code. Hyundai states it protects the motor from overheating; investigate the driving conditions when it set. The cited C-MDPS guidance says no replacement is necessary for C1603. · 2016–2020 View diagnostic report → C1604 Verified diagnostic record · 2016–2021 View diagnostic report → C1611 For Hyundai C1611, verified Hyundai service-bulletin evidence identifies the fault as an EMS CAN timeout. The listed checks are GDS condition, wiring/connectors, ECU CAN line, C-MDPS ground, and the EMS CAN line. · 2016–2021 View diagnostic report → C1616 Hyundai DTC C1616 is identified in verified Hyundai service communications as “CAN BUS OFF.” The specified action is to check the chassis CAN line. The full C-MDPS assembly is not to be replaced based on this code alone. · 2016–2021 View diagnostic report → C1622 Hyundai DTC C1622 is identified in the supplied official service-bulletin evidence as a vehicle-speed-signal error. The bulletin directs technicians to check the EMS (Engine ECU) and states that the full C-MDPS assembly is not to be replaced for this code. · 2016–2020 View diagnostic report → C1623 Verified diagnostic record · 2016–2019 View diagnostic report → C1687 Verified diagnostic record · 2016–2021 View diagnostic report → C1688 Hyundai DTC C1688 is identified in the supplied manufacturer communications as a VSM signal error in the MDPS (motor-driven power steering) context. The bulletin directs different next steps based on whether MDPS is inoperable or operating normally if the DTC returns. · 2016–2021 View diagnostic report → C1693 For the listed Hyundai applications, DTC C1693 is identified in official Hyundai service communications as a VSM signal error. The specified diagnostic direction is to check the VSM and associated wiring, repair as necessary, and erase the DTC(s). · 2016–2021 View diagnostic report → C1696 For verified Hyundai applicability, C1696 is identified as a SPAS signal error. Hyundai’s service communication directs technicians to check the SPAS and associated wiring, repair as necessary, erase DTC(s), and not replace the complete C-MDPS assembly for this code alone. · 2016–2020 View diagnostic report → C1697 Verified diagnostic record · 2016–2021 View diagnostic report → C1700 For applicable Hyundai vehicles, C1700 appears in Hyundai MDPS service information. The verified evidence places it in an R-MDPS Power-Pack-related DTC group, for which the published flowchart directs a connector/wiring check, DTC clearing and recheck, then Power Pack assembly replacement if the DTC remains. · 2016–2021 View diagnostic report → C1704 Verified diagnostic record · 2016–2020 View diagnostic report → C1705 Hyundai DTC C1705 is identified in verified Hyundai service communications as an MDPS ECU hardware error. For the applicable vehicles covered by the communications, the documented process is to erase the DTC, check ECU wiring and connectors, and replace the C-MDPS ECU (or Power Pack assembly) if the DTC returns. · 2016–2020 View diagnostic report → C2400 Hyundai DTC C2400 is identified in Hyundai C-MDPS repair-flowchart communications as a motor signal error. The documented procedure says that if C2400 returns, replace the MDPS motor (or Power Pack Assy). · 2016–2020 View diagnostic report → C2401 C2401 is identified in Hyundai manufacturer communications as an MDPS motor circuit error. The documented repair flow is to erase the DTC, inspect wiring and connectors between the ECU and motor, replace the C-MDPS ECU (or Power Pack assembly) first, and replace the C-MDPS motor if the DTC returns, where applicable. · 2016–2021 View diagnostic report → C2412 Verified diagnostic record · 2016–2019 View diagnostic report → C2413 Verified diagnostic record · 2016–2020 View diagnostic report → C2702 C2702 is referenced in Hyundai TSB 19-BE-011H-1 for vehicles equipped with Blind Spot Detection (BSD) or Blind-Spot Collision Warning (BCW). The supplied evidence does not establish a complete diagnostic definition for C2702. · 2016–2019 View diagnostic report → C2703 C2703 is documented by Hyundai’s TSB 19-BE-011H-1 in connection with Blind Spot Detection (BSD) or Blind-Spot Collision Warning (BCW) systems. The supplied evidence does not establish the exact fault definition for C2703. · 2016–2019 View diagnostic report → C2721 C2721 is identified as “System Calibration Required LDWS (Lane Departure Warning System).” Verified Hyundai TSB evidence references front-camera target calibration and states that performing this calibration will cause DTC C2721. · 2022–2026 View diagnostic report → P0630 For the listed Hyundai applications, P0630 is associated with the ECM/PCM VIN being not programmed or not matching. Hyundai states that a replacement module must be a new service replacement control module and its VIN must be programmed after installation. · 2016–2019 View diagnostic report → P0705 Verified diagnostic record · 2016–2019 View diagnostic report → P0706 P0706 is identified in the verified Hyundai service communication as “Range switch range/performance.” It is applicable to certain 2016–2019 Hyundai Kona and Sonata vehicles in the US. · 2016–2019 View diagnostic report → P0707 P0707 is identified in the supplied Hyundai evidence as “Range switch - open circuit.” The verified source also lists Malfunction Indicator Light (MIL) illumination as a symptom. · 2016–2019 View diagnostic report → P0722 P0722 is identified in the verified Hyundai evidence as “Output speed sensor – No signal.” · 2016–2024 View diagnostic report → P0729 Verified diagnostic record · 2016–2020 View diagnostic report → P072900 Verified diagnostic record · 2016–2020 View diagnostic report → P0730 Verified diagnostic record · 2016–2020 View diagnostic report → About this model coverage EV Diagnostics separates vehicle catalog data from diagnostic applicability. A code is listed as verified for Hyundai Kona only when supporting evidence connects that diagnostic identity to the model or its documented model-year range.