BEV model family

Hyundai Kona error codes and diagnostics

Diagnostic coverage for model years 2021–2025. Verified entries below are linked to this model family by source-backed applicability evidence; model membership alone is never used to invent a code relationship.

PowertrainBEV
Model years2021–2025
Verified diagnostics77
Evidence statusVerified

Verified Verified Hyundai Kona diagnostic codes

Showing 36–70 of 77 verified records for this model. Each result opens a manufacturer-specific report with the code meaning, affected vehicles, source evidence and the full diagnostic knowledge page where available.

P073000P073000 is identified in the supplied Hyundai manufacturer communications as “Gear 8 incorrect ratio.” The verified evidence applies this transmission DTC to certain Hyundai Kona and Sonata vehicles in the supplied applicability data; EV-specific relevance is not established. · 2016–2019View diagnostic report →P0731Verified diagnostic record · 2016–2020View diagnostic report →P073100P073100 is identified in the verified Hyundai service bulletin as “Gear 1 incorrect ratio.” The bulletin describes this condition as transaxle clutch slipping more than 200 rpm while in gear. The supplied evidence does not establish driveability, charging safety, severity, or a specific repair for your vehicle. · 2016–2020View diagnostic report →P0732P0732 is identified in the supplied Hyundai TSB evidence as “Gear 2 incorrect ratio.” The TSB describes it as an incorrect-ratio condition associated with transaxle clutch slipping more than 200 rpm while in gear. · 2016–2020View diagnostic report →P073200P073200 is identified by Hyundai TSB 20-AT-001H as “Gear 2 incorrect ratio.” The bulletin describes this group of incorrect-ratio DTCs as transaxle clutch slipping more than 200 rpm while in gear. · 2016–2020View diagnostic report →P0733Verified diagnostic record · 2016–2019View diagnostic report →P073300P073300 is a Hyundai transaxle diagnostic trouble code for “Gear 3 incorrect ratio.” Hyundai’s referenced service bulletins describe it as an incorrect-ratio condition associated with transaxle clutch slipping more than 200 rpm while in gear. · 2016–2019View diagnostic report →P0734Verified diagnostic record · 2016–2019View diagnostic report →P073400Verified diagnostic record · 2016–2019View diagnostic report →P0735Verified diagnostic record · 2016–2019View diagnostic report →P073500P073500 is identified in Hyundai manufacturer communications as “Gear 5 incorrect ratio.” The cited bulletins describe it as an incorrect-ratio DTC associated with transaxle clutch slipping more than 200 rpm while in gear. · 2016–2020View diagnostic report →P0736P0736 is identified in the supplied Hyundai manufacturer communications as “Reverse incorrect ratio.” The communications describe it as an incorrect-ratio DTC associated with transaxle clutch slipping more than 200 rpm while in gear. · 2016–2019View diagnostic report →P073600Verified diagnostic record · 2016–2020View diagnostic report →P074100For a 2019–2020 Hyundai Kona in the US, verified evidence links DTC P074100 to Hyundai automatic-transaxle service bulletin procedures. The supplied evidence does not establish a plain-language fault definition, severity, driving safety, charging safety, or a specific failed part. · 2019View diagnostic report →P074300For Hyundai Kona vehicles listed below, verified Hyundai/NHTSA service communications include DTC P074300 in an automatic-transaxle solenoid service procedure. The supplied evidence does not establish a plain-language fault definition for P074300. · 2019View diagnostic report →P0748Verified diagnostic record · 2016–2020View diagnostic report →P074800P074800 is identified in Hyundai official service communications as a Pressure Control (PC) solenoid DTC for certain automatic-transaxle applications. · 2016–2020View diagnostic report →P0753Verified diagnostic record · 2016–2020View diagnostic report →P075300P075300 is identified in verified Hyundai service information as Shift Solenoid A (UD) for the listed automatic-transaxle applications. Hyundai bulletins direct technicians to the applicable TSB or shop manual when this solenoid DTC is present. · 2019–2020View diagnostic report →P0758Verified diagnostic record · 2016–2020View diagnostic report →P075800Verified diagnostic record · 2016–2020View diagnostic report →P076FVerified diagnostic record · 2016–2019View diagnostic report →P076F00P076F00 is identified in Hyundai manufacturer communications as “Gear 7 incorrect ratio.” The supplied evidence applies it to certain 2016–2020 Hyundai Kona and Sonata vehicles in the US, but it does not establish EV-specific applicability. · 2016–2020View diagnostic report →P0845For a 2022–2023 Hyundai Kona in the US, DTC P0845 is referenced in Hyundai TSB 23-AT-010H under a pressure-sensor replacement procedure for the IVT. The bulletin directs use of Hyundai GDS-M to enter a pressure-sensor characteristic value and perform TCU adaptive-values learning after the repair. · 2022–2023View diagnostic report →P0846For applicable 2022–2023 Hyundai Kona vehicles in the US, DTC P0846 is referenced in Hyundai TSB 23-AT-010H under pressure-sensor replacement and IVT adaptive-value relearning procedures. · 2022–2023View diagnostic report →P0867For applicable 2022–2023 Hyundai Kona vehicles in the US, DTC P0867 is referenced in Hyundai TSB 23-AT-010H under a pressure-sensor replacement procedure for the IVT. The bulletin calls for entering a pressure-sensor characteristic value with GDS-M and completing TCU adaptive-values learning. · 2022–2023View diagnostic report →P193B79P193B79 is listed by Hyundai/NHTSA material as an HP EOP low hydraulic-pressure DTC. The supplied evidence does not establish severity, whether the vehicle is safe to drive, charging impact, or a specific repair for this code. · 2022View diagnostic report →P193D13P193D13 is identified in Hyundai service information as “HF EOP System Fault – Open circuit.” Verified applicability is limited to 2022 Hyundai Kona and 2022 Hyundai Santa Fe in the US. The supplied evidence does not establish driveability, charging safety, urgency, symptoms, or a specific repair. · 2022View diagnostic report →P193D19P193D19 is identified in Hyundai service bulletin 22-AT-009H as “HF EOP System Fault - Over current.” The bulletin instructs technicians to inspect the wiring harness and, if no harness issue is found, replace the HF EOP. · 2022View diagnostic report →P193D1DP193D1D is identified in Hyundai service communication 22-AT-009H as “HF EOP System Fault - Current sensor failure.” It is verified as applicable to certain 2022 US Hyundai Santa Fe vehicles. Driveability, charging safety, and urgency are not yet established by verified evidence. · 2022View diagnostic report →P193D29P193D29 is identified in Hyundai service information as an HF EOP system fault: Hall sensor failure. The same bulletin also lists CAN-related DTCs that may occur with this condition. Refer to the related shop manual for diagnosis; if no wiring-harness issue is found, the bulletin directs replacement of the DCT. · 2022View diagnostic report →P193D4BP193D4B is a Hyundai HF EOP system fault identified as “Over temperature.” Hyundai’s official service communication directs technicians to diagnose the related shop-manual procedure, inspect for wiring-harness issues, and replace the HF EOP if no harness issue is found. · 2022View diagnostic report →P193D96P193D96 is identified by Hyundai as an HF EOP System Fault—Internal fault. Hyundai’s bulletin groups it with several HF EOP-related faults and specifies replacement of the HF EOP for the listed DTCs. · 2022View diagnostic report →P193E71P193E71 is identified in Hyundai bulletin 22-AT-009H as “HF EOP Performance – EOP stuck.” The bulletin directs replacement of the HF EOP when this DTC is found. · 2022View diagnostic report →P1C2D03P1C2D03 is identified in Hyundai bulletin 22-AT-009H as an HP EOP motor position sensor range DTC. The supplied evidence applies it to certain U.S. 2022 Hyundai Kona and Santa Fe vehicles. · 2022View diagnostic report →

About this model coverage

EV Diagnostics separates vehicle catalog data from diagnostic applicability. A code is listed as verified for Hyundai Kona only when supporting evidence connects that diagnostic identity to the model or its documented model-year range.

Related navigation

All Hyundai EV models and diagnostics · Search all diagnostic codes · How verification works