EV Diagnostics
Verified EV diagnostic knowledge page

Audi C1260F0

compressor control unit for adaptive suspension, no communication

DriveNot yet established by verified evidence.
ChargeNot yet established by verified evidence.
ServiceService is appropriate because the verified Audi bulletin specifies inspection of wiring and connector contacts for this condition. The supplied evidence does not establish urgency or whether driving should stop.
Confidence95%

Quick answer

Audi DTC C1260F0 means: “compressor control unit for adaptive suspension, no communication.” Verified Audi service information associates it with an air-suspension malfunction warning and directs inspection of relevant wiring and connector contacts.

This page separates verified manufacturer/regulator evidence from supporting material. Unsupported causes, repairs or safety conclusions are not guessed.

Video guides

Watch Videos

Relevant videos play here without leaving this diagnostic page.

No sufficiently relevant embeddable video has been accepted for this diagnostic yet.

Videos are supporting material and never override OEM or regulator evidence.

1. What does C1260F0 mean?

Audi DTC C1260F0 means: “compressor control unit for adaptive suspension, no communication.” Verified Audi service information associates it with an air-suspension malfunction warning and directs inspection of relevant wiring and connector contacts.

2. Technical explanation

In the cited Audi technical service bulletin, C1260F0 may be stored in the suspension control module J1135 (address word 0074) with symptom code 262400. The bulletin identifies a loss of communication with the adaptive-suspension compressor control unit. It also lists U112100, “data bus, missing message,” with the same symptom code.

3. What system is affected?

Adaptive/air suspension; specifically, communication involving the compressor control unit and suspension control module.

4. How serious is this code?

Unknown. The supplied verified evidence does not assign a severity rating.

5. Symptoms you may notice

  • Air suspension malfunction warning in the instrument cluster, shown with the air-spring symbol.
  • C1260F0 stored in suspension control module J1135 (address word 0074) with symptom code 262400.

6. Possible causes

  • Irregularities in wiring between the suspension control module J775 and the compressor control unit are identified for inspection in the cited Audi bulletin.
  • Irregularities in connector contacts between the suspension control module J775 and the compressor control unit are identified for inspection in the cited Audi bulletin.
  • Any further root cause is not yet established by verified evidence.

7. Can I still drive the vehicle?

Not yet established by verified evidence.

8. Can I charge the vehicle?

Not yet established by verified evidence.

9. What you can safely do

  • Arrange diagnosis by an Audi-qualified service facility.
  • Provide the stored code C1260F0 and note whether the air-suspension malfunction warning is displayed.
  • Do not attempt high-voltage-related repairs; no high-voltage repair procedure is established by the supplied evidence.

10. Step-by-step troubleshooting

  1. Use a suitable diagnostic tool to confirm whether C1260F0 is stored in suspension control module J1135 (address word 0074) and whether symptom code 262400 is present.
  2. Have qualified service personnel check wiring and connector contacts between suspension control module J775 and the compressor control unit, as directed by the cited Audi bulletin.
  3. The supplied evidence does not establish additional diagnostic steps.

11. When to contact service

Service is appropriate because the verified Audi bulletin specifies inspection of wiring and connector contacts for this condition. The supplied evidence does not establish urgency or whether driving should stop.

12. What the service center may check

  • Check for irregularities in wiring between suspension control module J775 and the compressor control unit.
  • Check for irregularities in connector contacts between suspension control module J775 and the compressor control unit.
  • Confirm the DTC and symptom code in suspension control module J1135 (address word 0074).

13. Possible repair or resolution

  • The supplied verified evidence establishes inspection of wiring and connector contacts, but does not establish a specific repair outcome or replacement part.
  • Further repair resolution is not yet established by verified evidence.

14. Affected vehicles

15. Related TSBs / service bulletins

  • Audi Technical Service Bulletin A4320342059363_1, initial publication April 28, 2020; NHTSA manufacturer communication MC-10174551-0001. It covers specified adaptive-suspension vehicles including Audi e-tron quattro model years 2019–2021 and addresses C1260F0 or U112100 with symptom code 262400.
  • Audi Technical Service Bulletin A4321532059363_2, published August 12, 2021; NHTSA manufacturer communication MC-10200437-0001. It revises the header by adding a model year and describes the same warning and DTC condition.
  • Audi Technical Service Bulletin A4322622059363_3, published June 9, 2022; NHTSA manufacturer communication MC-10214467-0001. It revises the header by adding a model year and describes the same warning and DTC condition.

16. Recall information

  • No recall is established by the supplied verified evidence.

17. Official manufacturer information

Official NHTSA-hosted Audi manufacturer communications: https://static.nhtsa.gov/odi/tsbs/2022/MC-10214467-0001.pdf ; https://static.nhtsa.gov/odi/tsbs/2021/MC-10200437-0001.pdf ; https://static.nhtsa.gov/odi/tsbs/2020/MC-10174551-0001.pdf

19. Frequently asked questions

What does Audi code C1260F0 mean?

It means “compressor control unit for adaptive suspension, no communication.”

What warning may appear with C1260F0?

The cited Audi bulletin states that an air suspension malfunction warning, using the air-spring symbol in the instrument cluster, may be reported.

What should be checked?

The cited Audi bulletin directs checking wiring and connector contacts between suspension control module J775 and the compressor control unit.

Is C1260F0 the only code associated with this bulletin?

No. The bulletin also lists U112100, “data bus, missing message,” with symptom code 262400.

Can I drive or charge the vehicle?

Not yet established by verified evidence.

20. Sources & verification

Verified
Audi C1260F0: compressor control unit for adaptive suspension, no… | EV Diagnostics