Verified EV diagnostic knowledge page

Hyundai P073500

P073500 is identified in Hyundai manufacturer communications as “Gear 5 incorrect ratio.” The cited bulletins describe it as an incorrect-ratio DTC associated with transaxle clutch slipping more than 200 rpm while in gear.

DriveNot yet established by verified evidence.
ChargeNot yet established by verified evidence.
ServiceContact a Hyundai dealer or qualified service provider for diagnosis of the transaxle incorrect-ratio DTC.
Confidence95%

Evidence snapshot

Verified sources2
Affected models1
Model years2016–2020
TSB / bulletin sources2

Last evidence review: 2026-09-24. Applicability is shown only where a model relationship is supported by evidence.

Quick answer

P073500 is identified in Hyundai manufacturer communications as “Gear 5 incorrect ratio.” The cited bulletins describe it as an incorrect-ratio DTC associated with transaxle clutch slipping more than 200 rpm while in gear.

This page separates verified manufacturer/regulator evidence from supporting material. Unsupported causes, repairs or safety conclusions are not guessed.

Video guides

Watch Videos

Relevant videos play here without leaving this diagnostic page.

No sufficiently relevant embeddable video has been accepted for this diagnostic yet.

Videos are supporting material and never override OEM or regulator evidence.

1. What does Hyundai P073500 mean?

P073500 is identified in Hyundai manufacturer communications as “Gear 5 incorrect ratio.” The cited bulletins describe it as an incorrect-ratio DTC associated with transaxle clutch slipping more than 200 rpm while in gear.

2. Technical explanation

Hyundai TSBs 20-AT-001H and 19-AT-012H list P0735 / P073500 as Gear 5 incorrect ratio. The bulletins group it with incorrect-ratio DTCs and state that these concern transaxle clutch slipping more than 200 rpm in gear. The supplied evidence does not establish a vehicle-specific root cause, diagnostic result, or repair for a particular vehicle.

3. What system is affected?

Transaxle, based on the official Hyundai TSB descriptions.

4. How serious is this code?

Not yet established by verified evidence.

5. Hyundai P073500 symptoms you may notice

Not yet established by verified evidence.

6. Possible causes of Hyundai P073500

  • The verified evidence identifies an incorrect gear-5 ratio condition and describes the related DTC group as involving transaxle clutch slipping more than 200 rpm in gear. A specific underlying cause is not yet established by verified evidence.

7. Can I drive with Hyundai P073500?

Not yet established by verified evidence.

8. Can I charge with Hyundai P073500?

Not yet established by verified evidence.

9. What you can safely do

  • Arrange diagnosis using the applicable Hyundai transaxle service procedure.
  • Do not attempt high-voltage or other hazardous repair work.

10. How to troubleshoot Hyundai P073500

  1. Confirm the stored DTC is P073500.
  2. Use the applicable Hyundai procedure referenced by TSB 20-AT-001H or 19-AT-012H. The supplied evidence does not include the detailed diagnostic steps.

11. When to contact service

Contact a Hyundai dealer or qualified service provider for diagnosis of the transaxle incorrect-ratio DTC.

12. What the service center may check

  • Verify P073500 / Gear 5 incorrect ratio.
  • Apply the applicable Hyundai TSB procedure for incorrect-ratio DTCs. Detailed checks are not included in the supplied evidence.

13. Possible repair or resolution for Hyundai P073500

  • Hyundai TSB 20-AT-001H states that it provides a procedure to diagnose and repair the transaxle for listed incorrect-ratio DTCs, including P073500.
  • Hyundai TSB 19-AT-012H likewise states that it provides a procedure to diagnose and repair the transaxle for P073500.
  • The specific repair outcome or parts required are not yet established by the supplied verified evidence.

14. Affected vehicles

15. Related TSBs / service bulletins

  • Hyundai TSB 20-AT-001H, published January 2, 2020: procedure to diagnose and repair transaxle incorrect-ratio DTCs, including P073500 (Gear 5 incorrect ratio).
  • Hyundai TSB 19-AT-012H, published June 4, 2019: procedure to diagnose and repair transaxle incorrect-ratio DTCs, including P073500 (Gear 5 incorrect ratio).

16. Recall information

No recall relationship is established by verified evidence.

17. Official manufacturer information

Verified source coverage for this diagnostic is listed below. Open the cited document for the full manufacturer or regulator context.

19. Hyundai P073500 frequently asked questions

What does Hyundai code P073500 mean?

The verified Hyundai TSB evidence identifies P073500 as Gear 5 incorrect ratio.

What does the Hyundai bulletin say about this type of code?

The bulletins describe the listed incorrect-ratio DTCs as transaxle clutch slipping more than 200 rpm in gear.

Is it safe to drive with P073500?

Not yet established by verified evidence.

Does P073500 affect EV charging?

Not yet established by verified evidence.

Is there an official Hyundai service bulletin?

Yes. The supplied evidence includes Hyundai TSBs 20-AT-001H and 19-AT-012H, both covering diagnosis and repair procedures for incorrect-ratio DTCs including P073500.

20. Sources & verification

Verified

Evidence sources: 2 · Page reviewed 2026-09-24 · Editorial & quality policy