Hyundai P0867
PARTIAL REPAIR OF IVT & RELEARN ADAPTIVE VALUES TSB #: 23-AT-010H Page 6 of 7 SUBJECT: SUBJECT: 2. Input “76” for the pressure sensor characteristic value and then press “OK”. PRES
Quick answer
For applicable 2022–2023 Hyundai Kona vehicles in the US, DTC P0867 is referenced in Hyundai TSB 23-AT-010H under a pressure-sensor replacement procedure for the IVT. The bulletin calls for entering a pressure-sensor characteristic value with GDS-M and completing TCU adaptive-values learning.
This page separates verified manufacturer/regulator evidence from supporting material. Unsupported causes, repairs or safety conclusions are not guessed.
Watch Videos
Relevant videos play here without leaving this diagnostic page.
No sufficiently relevant embeddable video has been accepted for this diagnostic yet.
Videos are supporting material and never override OEM or regulator evidence.
1. What does P0867 mean?
For applicable 2022–2023 Hyundai Kona vehicles in the US, DTC P0867 is referenced in Hyundai TSB 23-AT-010H under a pressure-sensor replacement procedure for the IVT. The bulletin calls for entering a pressure-sensor characteristic value with GDS-M and completing TCU adaptive-values learning.
2. Technical explanation
Verified evidence does not establish a standalone generic definition for P0867. Hyundai’s official TSB 23-AT-010H identifies P0867 alongside P0845 and P0846 in the context of IVT pressure sensor replacement. The bulletin instructs use of Hyundai GDS-M, entry of “76” for the pressure sensor characteristic value, and completion of the TCU adaptive-values learning procedure as directed by the tool.
3. What system is affected?
IVT pressure-sensor/TCU adaptive-learning procedure, based on Hyundai TSB 23-AT-010H.
4. How serious is this code?
Not yet established by verified evidence.
5. Symptoms you may notice
Not yet established by verified evidence.
6. Possible causes
- For the listed Hyundai application, verified evidence links P0867 to the IVT pressure-sensor replacement procedure. A specific fault cause is not yet established by verified evidence.
7. Can I still drive the vehicle?
Not yet established by verified evidence.
8. Can I charge the vehicle?
Not yet established by verified evidence.
9. What you can safely do
- Arrange diagnosis by a Hyundai dealer or qualified service facility using Hyundai GDS-M or equivalent authorized diagnostic capability.
- Do not attempt high-voltage or transmission repair procedures without appropriate training and equipment.
10. Step-by-step troubleshooting
- Verify the vehicle is a 2022–2023 Hyundai Kona for the US market.
- Retrieve and record stored diagnostic trouble codes with approved diagnostic equipment.
- Refer to Hyundai TSB 23-AT-010H for the applicable IVT pressure-sensor replacement and TCU adaptive-learning procedure.
- If a pressure sensor is replaced, the verified bulletin procedure includes entering “76” as the pressure sensor characteristic value in GDS-M and following GDS-M instructions for TCU adaptive-values learning.
11. When to contact service
Contact a Hyundai dealer or qualified Hyundai service facility for diagnosis and, where applicable, the procedure in TSB 23-AT-010H.
12. What the service center may check
- Confirm DTC P0867 is present.
- Determine whether the vehicle falls within the verified applicability: 2022–2023 Hyundai Kona, US.
- Follow Hyundai TSB 23-AT-010H when IVT pressure-sensor replacement is applicable.
- Use GDS-M to enter the verified pressure-sensor characteristic value of “76” and complete the prompted TCU adaptive-values learning procedure.
13. Possible repair or resolution
- The verified service-bulletin procedure, when applicable, is IVT pressure-sensor replacement followed by pressure-characteristic input and TCU adaptive-values learning with GDS-M.
- Whether replacement is required for every occurrence of P0867 is not yet established by verified evidence.
14. Affected vehicles
- Hyundai Kona · 2022–2023 · US
15. Related TSBs / service bulletins
- Hyundai TSB 23-AT-010H, published August 23, 2023: references DTC P0867 in its IVT pressure-sensor replacement and TCU adaptive-values relearn procedure for the verified vehicle application.
16. Recall information
No recall relationship is established by verified evidence.
17. Official manufacturer information
Official source: NHTSA-hosted Hyundai Manufacturer Communication PDF 10241878, Hyundai TSB 23-AT-010H: https://static.nhtsa.gov/odi/tsbs/2023/MC-10241878-0001.pdf
19. Frequently asked questions
What does P0867 mean on the verified Hyundai application?
The supplied verified evidence does not provide a standalone code definition. It links P0867 to Hyundai’s IVT pressure-sensor replacement procedure and subsequent TCU adaptive-values learning.
Which vehicles are supported by the verified evidence?
2022–2023 Hyundai Kona vehicles in the US.
Does the bulletin specify a diagnostic-tool procedure?
Yes. It specifies GDS-M, entry of “76” for the pressure sensor characteristic value, and following GDS-M instructions to perform TCU adaptive-values learning.
Is there a verified recall for this issue?
Not yet established by verified evidence.