BEV model family

Audi e-tron error codes and diagnostics

Diagnostic coverage for model years 2021–2023. Verified entries below are linked to this model family by source-backed applicability evidence; model membership alone is never used to invent a code relationship.

PowertrainBEV
Model years2021–2023
Verified diagnostics174
Evidence statusVerified

Verified Verified Audi e-tron diagnostic codes

Showing 141–174 of 174 verified records for this model. Each result opens a manufacturer-specific report with the code meaning, affected vehicles, source evidence and the full diagnostic knowledge page where available.

SOS Emergency Call function: malfunction. Function unavailable. Please contact serviceFor certain 2023 US Audi Q5, e-tron, e-tron GT, and RS e-tron GT vehicles, this alert indicates that the SOS Emergency Call function is malfunctioning or unavailable. Audi’s referenced technical service bulletin documents the instrument-cluster message and directs the customer to contact service. · 2023View diagnostic report →SOS – Emergency call malfunction, please contact serviceFor certain 2021 US Audi models, this instrument-cluster message is covered by Audi manufacturer communications concerning the emergency-call module and communication unit. Contact Audi service for diagnosis. · 2021View diagnostic report →Side assist and exit warning system: fault. Please contact service.This Audi alert indicates a fault affecting the side assist and exit warning system. Official Audi technical-service communications document this message in connection with sporadically inoperative lane change assist/intersection assist on certain vehicles. · 2020–2021View diagnostic report →Side assist and exit warning system: fault. Please contact workshop.Audi identifies this message as a fault condition in which intersection/lane-change assist may be inoperative. An Audi workshop should evaluate it; driving and charging status are not established by the verified evidence. · 2019–2024View diagnostic report →Start/stop system: system fault. Function unavailable. Please contact workshopThis Audi instrument-cluster alert indicates that the start/stop system is unavailable because the vehicle has detected a system fault. The supplied official Audi manufacturer communication instructs contact with a workshop. · 2016–2024View diagnostic report →Traffic Jam Assist: malfunction!Audi’s “Traffic Jam Assist: malfunction!” alert is a verified instrument-cluster malfunction indication. An Audi technical service bulletin (TSB) documents it together with possible stored faults involving the front camera R242 and distance regulation control module J428. · 2021–2023View diagnostic report →U012700U012700 is documented by Audi as “Tire Pressure Monitoring Control Module - no Communication” with symptom code 358656 (static). · 2022View diagnostic report →U015100Verified diagnostic record · 2019–2020View diagnostic report →U029200For certain 2019 Audi e-tron vehicles in the US, DTC U029200 may be associated with an incorrectly routed low-voltage wiring harness for the rear electric drive motor. Audi states this harness may be damaged, and fuses SJ7 and/or SD5 may be open. · 2019View diagnostic report →U101400For the listed Audi vehicles, U101400 may be stored in telematics control module J949 (address word 0075) because of a start-up timing issue. Audi’s communication states that no repair is available and repairs should not be performed for this concern. · 2019–2020View diagnostic report →U103100For certain US Audi e-tron and e-tron Sportback vehicles, DTC U103100 may be stored sporadically in the ABS control module and is addressed by an ABS control-module software update. · 2019–2021View diagnostic report →U110100For the Audi applications covered by the verified bulletin, U110100 may be an erroneously stored “ghost DTC” in the driver-assistance systems control module. Audi states that it does not cause functional problems or visible warning messages, and repairs should not be performed for that concern. · 2019–2020View diagnostic report →U110300For specified 2021–2022 US Audi models, DTC U110300 is identified in Audi service communications as “Production mode active” in the telematics control module J949 (address word 0075). Audi directs technicians to run the control-module replacement test plan through ODIS Guided Functions, without replacing the module. · 2021–2022View diagnostic report →U112100Audi DTC U112100 means “data bus, missing message.” Verified evidence links it to more than one system context, including adaptive air suspension and the high-voltage battery charger control module. The code alone does not establish a single failed part or whether the vehicle is safe to drive or charge. · 2020–2021View diagnostic report →U112200Audi DTC U112200 is identified in verified manufacturer communications as “Data bus implausible message.” In the cited condition, it may be stored as static with symptom code 303616. Static DTCs cannot be erased; intermittent DTCs may erase but return when the condition recurs. · 2022View diagnostic report →U112300Verified diagnostic record · 2019–2023View diagnostic report →U122800For a 2019–2020 US Audi e-tron, DTC U122800 means “Driver door control unit implausible.” Audi service communications identify a software update as the technical background for this condition. · 2019–2020View diagnostic report →U122C00For certain 2019–2020 US Audi A8 and e-tron vehicles, U122C00 can be stored in the Gateway (J533) when the emergency call module and communication unit (ConBox, J949) temporarily stops communicating with the vehicle due to a sporadic startup issue. · 2019–2020View diagnostic report →U12B800Verified diagnostic record · 2019–2020View diagnostic report →U131C00Verified diagnostic record · 2021–2023View diagnostic report →U13AE00For certain US-market 2020–2021 Audi e-tron vehicles, DTC U13AE00 is identified as “Active parking system control module.” Audi service communications list it as a DTC that may be stored in the high-voltage battery charger control module (OBC), J1050, address word 00C6. · 2021View diagnostic report →U13EB00U13EB00 is an Audi DTC meaning “Emergency call module and communication unit Flight mode activated.” Verified Audi bulletins associate it with the emergency-call/communications module at address 0075. · 2019–2022View diagnostic report →U142100Audi DTC U142100 means the gateway cannot communicate with the emergency call module and communication unit (ConBox). Verified Audi bulletins associate it with an SOS malfunction message on certain vehicles and identify specific startup or transport-mode situations in documented cases. · 2019–2023View diagnostic report →U14A00Audi DTC U14A00 is identified as “Terminal 30.” Verified NHTSA-hosted Audi manufacturer communications state that this code may be stored in the ECM. Its driving, charging, and service urgency are not yet established by verified evidence supplied. · 2017–2025View diagnostic report →U153E00U153E00 indicates that the emergency-call module/communication unit could not be recognized on the mobile communications network. Audi documentation associates it with an SOS emergency-call-function-deactivated message and a loss of connection to the mobile network operator (AT&T). · 2019–2020View diagnostic report →U15AB00For applicable U.S. 2020–2021 Audi e-tron vehicles, DTC U15AB00 is identified in an Audi manufacturer communication as “Fast battery charging (DC) Communication.” · 2021View diagnostic report →U15AC00For certain US-market 2019–2021 Audi e-tron vehicles, U15AC00 means “Signal damping log Malfunction.” Audi documentation states that after a specified flashing procedure, U15AC00 can be stored statically due to a diagnostic flaw and cannot be erased; in that specific post-flash context, Audi says it may be ignored. · 2019–2020View diagnostic report →U15B500Audi DTC U15B500 is identified in verified Audi communications as “Fast battery charging (DC) Charging station.” It is documented for US-market 2020–2021 Audi e-tron vehicles. · 2020–2021View diagnostic report →U15BF00Verified diagnostic record · 2020–2021View diagnostic report →U15C900Verified diagnostic record · 2021–2022View diagnostic report →U164200Audi DTC U164200 means “Ethernet Emergency Call Module no communication.” For verified 2019–2020 US Audi A8 and e-tron applications, Audi service communications associate it with an SOS malfunction message and a temporary loss of communication with the emergency call module and communication unit (ConBox), J949. · 2019–2020View diagnostic report →Vehicle lights: fault. Please contact workshopVerified diagnostic record · 2023–2024View diagnostic report →Vehicle sound: Malfunction! Pedestrians cannot hear vehicle. Please contact ServiceVerified diagnostic record · 2021–2023View diagnostic report →Vehicle start system: fault. Please contact workshopVerified diagnostic record · 2016–2025View diagnostic report →

About this model coverage

EV Diagnostics separates vehicle catalog data from diagnostic applicability. A code is listed as verified for Audi e-tron only when supporting evidence connects that diagnostic identity to the model or its documented model-year range.

Related navigation

All Audi EV models and diagnostics · Search all diagnostic codes · How verification works