Hyundai P0733
For the Hyundai vehicles listed in the verified applicability data, P0733 is identified in official Hyundai TSB material as P073300: Gear 3 incorrect ratio. The TSB describes this incorrect-ratio group as transaxle clutch slipping more than 200 rpm while in gear.
Evidence snapshot
Last evidence review: 2026-09-24. Applicability is shown only where a model relationship is supported by evidence.
Quick answer
For the Hyundai vehicles listed in the verified applicability data, P0733 is identified in official Hyundai TSB material as P073300: Gear 3 incorrect ratio. The TSB describes this incorrect-ratio group as transaxle clutch slipping more than 200 rpm while in gear.
This page separates verified manufacturer/regulator evidence from supporting material. Unsupported causes, repairs or safety conclusions are not guessed.
Watch Videos
Relevant videos play here without leaving this diagnostic page.
Videos are supporting material and never override OEM or regulator evidence.
1. What does Hyundai P0733 mean?
For the Hyundai vehicles listed in the verified applicability data, P0733 is identified in official Hyundai TSB material as P073300: Gear 3 incorrect ratio. The TSB describes this incorrect-ratio group as transaxle clutch slipping more than 200 rpm while in gear.
2. Technical explanation
Verified Hyundai TSB evidence groups P0733 with transaxle incorrect-ratio DTCs. Specifically, P0733/P073300 is listed as “Gear 3 incorrect ratio.” The TSB states that these DTCs concern transaxle clutch slipping more than 200 rpm in gear and provides a diagnostic and repair procedure for the transaxle. The supplied evidence does not establish a vehicle-specific failed part or a universal repair for every occurrence of P0733.
3. What system is affected?
Transaxle / transmission system.
4. How serious is this code?
Not yet established by verified evidence.
5. Hyundai P0733 symptoms you may notice
- A transaxle incorrect-ratio DTC, P0733/P073300, may be stored.
- The verified TSB description identifies transaxle clutch slipping more than 200 rpm in gear as the condition addressed by this DTC group.
6. Possible causes of Hyundai P0733
- Not yet established by verified evidence. The supplied official TSB evidence identifies the condition and provides a diagnostic/repair procedure, but does not provide verified root causes in the supplied record.
7. Can I drive with Hyundai P0733?
Not yet established by verified evidence.
8. Can I charge with Hyundai P0733?
Not yet established by verified evidence.
9. What you can safely do
- Arrange professional diagnosis using the applicable Hyundai transaxle diagnostic procedure.
- Do not attempt transaxle or high-voltage-system repairs without qualified service training and equipment.
10. How to troubleshoot Hyundai P0733
- Confirm the stored DTC is P0733/P073300.
- Have a qualified Hyundai service facility apply the diagnostic procedure in the applicable Hyundai incorrect-ratio TSB.
- Not yet established by verified evidence: specific at-home diagnostic steps, measurements, or component tests.
11. When to contact service
Professional service is appropriate because the official Hyundai TSB provides a transaxle diagnostic and repair procedure for P0733 and related incorrect-ratio DTCs.
12. What the service center may check
- Confirm P0733/P073300, identified by the TSB as Gear 3 incorrect ratio.
- Use the applicable Hyundai TSB procedure for diagnosis and repair of the transaxle incorrect-ratio condition.
- Assess the vehicle under the scope and applicability of the relevant Hyundai TSB.
13. Possible repair or resolution for Hyundai P0733
- The verified Hyundai TSB states that it provides a procedure to diagnose and repair the transaxle for this incorrect-ratio DTC group.
- Not yet established by verified evidence: the exact repair required for an individual vehicle.
14. Affected vehicles
- Hyundai Kona · 2016–2020 · US
- Hyundai Kona · 2016–2019 · US
15. Related TSBs / service bulletins
- Hyundai TSB 20-AT-001H, published January 2, 2020; NHTSA Manufacturer Communication 10170899. It supersedes TSB 19-AT-012H and covers incorrect-ratio DTCs including P0733/P073300.
- Hyundai TSB 19-AT-012H, published June 4, 2019; NHTSA Manufacturer Communication 10163279. It covers transaxle incorrect-ratio DTCs including P0733/P073300.
16. Recall information
- Not yet established by verified evidence.
17. Official manufacturer information
Verified source coverage for this diagnostic is listed below. Open the cited document for the full manufacturer or regulator context.
19. Hyundai P0733 frequently asked questions
What does Hyundai P0733 mean?
The verified Hyundai TSB lists P0733/P073300 as “Gear 3 incorrect ratio.”
What condition does the Hyundai TSB associate with P0733?
The TSB describes the incorrect-ratio DTC group as transaxle clutch slipping more than 200 rpm in gear.
Is there an official service bulletin for P0733?
Yes. The supplied evidence includes Hyundai TSBs 20-AT-001H and 19-AT-012H, both covering P0733 among transaxle incorrect-ratio DTCs.
Is P0733 covered by a recall?
Not yet established by verified evidence.
20. Sources & verification
Evidence sources: 2 · Page reviewed 2026-09-24 · Editorial & quality policy