Ford P068A
15 VEHICLES. *PE
Quick answer
For certain 2009–2015 Ford vehicles, including 2012–2015 US Ford Focus applicability in the supplied data, P068A may appear with the MIL after powertrain control module (PCM) reprogramming if the key was not left in the OFF position for 30 seconds after programming.
This page separates verified manufacturer/regulator evidence from supporting material. Unsupported causes, repairs or safety conclusions are not guessed.
Watch Videos
Relevant videos play here without leaving this diagnostic page.
Videos are supporting material and never override OEM or regulator evidence.
1. What does P068A mean?
For certain 2009–2015 Ford vehicles, including 2012–2015 US Ford Focus applicability in the supplied data, P068A may appear with the MIL after powertrain control module (PCM) reprogramming if the key was not left in the OFF position for 30 seconds after programming.
2. Technical explanation
The verified NHTSA manufacturer communication states that, after PCM reprogramming, the malfunction indicator lamp (MIL) may be on with DTCs P06B8, P068A, and P2610 when the key was not left in the OFF position for 30 seconds following programming. The supplied evidence does not establish a general component failure meaning for P068A beyond this post-programming scenario.
3. What system is affected?
Powertrain control module (PCM) programming/post-programming procedure. A broader affected system is not yet established by verified evidence.
4. How serious is this code?
Unknown. The supplied verified evidence does not assign a severity level.
5. Symptoms you may notice
- MIL illuminated after PCM reprogramming.
- P068A may be stored with P06B8 and P2610 after PCM reprogramming in the documented scenario.
6. Possible causes
- After PCM reprogramming, the key was not left in the OFF position for 30 seconds, according to the cited manufacturer communication.
7. Can I still drive the vehicle?
Not yet established by verified evidence.
8. Can I charge the vehicle?
Not yet established by verified evidence.
9. What you can safely do
- If this code appeared after PCM reprogramming, provide the service facility with the documented post-programming context and the listed accompanying codes, if present.
- Do not attempt high-voltage repairs or other unsupported repair procedures based on this evidence.
10. Step-by-step troubleshooting
- Verify whether the MIL and P068A appeared after PCM reprogramming.
- Verify whether the key was left in the OFF position for 30 seconds following programming.
- Check whether P06B8 and P2610 are also present, as listed in the manufacturer communication.
11. When to contact service
Service assistance is appropriate if P068A is present after PCM reprogramming or if the MIL remains illuminated. The supplied evidence does not establish a specific repair procedure.
12. What the service center may check
- Confirm PCM reprogramming history.
- Confirm the documented 30-second key-OFF period after programming.
- Retrieve and document any accompanying P06B8 and P2610 DTCs.
13. Possible repair or resolution
- Not yet established by verified evidence. The supplied communication identifies the post-programming condition but does not provide a verified repair resolution in the supplied evidence.
14. Affected vehicles
- Ford Focus · 2012–2015 · US
15. Related TSBs / service bulletins
- NHTSA Manufacturer Communication 10057865 (ASI-44707), published September 1, 2014: After PCM reprogramming, MIL illumination with P06B8, P068A, and P2610 may occur if the key is not left OFF for 30 seconds after programming on some 2009–2015 vehicles.
- Source: https://static.nhtsa.gov/odi/ffdd/tsbs/TSBS_RECEIVED_2015-2019.zip#nhtsa_id=10057865
16. Recall information
- Not yet established by verified evidence.
17. Official manufacturer information
Verified source: NHTSA Manufacturer Communication 10057865 (ASI-44707), a Ford manufacturer communication. Supplied applicability identifies Ford Focus, model years 2012–2015, US region. The communication itself refers more broadly to some 2009–2015 vehicles.
- NHTSA: NHTSA Manufacturer Communication 10057865: ASI-44707 · official_tsb
19. Frequently asked questions
What does P068A mean in the supplied Ford evidence?
The supplied evidence documents P068A as one of several codes that may be present with an illuminated MIL after PCM reprogramming when the key was not left OFF for 30 seconds. A broader code definition is not established by the supplied evidence.
Which other codes may appear with P068A in this scenario?
The manufacturer communication lists P06B8 and P2610 with P068A.
Does this evidence confirm that P068A makes the vehicle unsafe to drive or charge?
No. Driveability and charging safety are not established by the supplied verified evidence.