Verified EV diagnostic knowledge page

Mitsubishi P1A7F

P1A7F is identified in a Mitsubishi technical service bulletin as “CMU10 Cell Voltage Sensor.” Verified applicability is the 2016 Mitsubishi i-MiEV sold in the US.

DriveUnknown. Whether the vehicle can be driven is not established by verified evidence.
ChargeUnknown. Whether the vehicle can be charged is not established by verified evidence.
ServiceService need is listed as unknown in the supplied diagnostic record. Because this DTC concerns a cell-voltage sensor identified in a main drive lithium-ion battery bulletin, qualified Mitsubishi EV service assessment is appropriate.
Confidence95%

Evidence snapshot

Verified sources1
Affected models0
Model yearsNot yet established
TSB / bulletin sources1

Last evidence review: 2026-10-12. Applicability is shown only where a model relationship is supported by evidence.

Quick answer

P1A7F is identified in a Mitsubishi technical service bulletin as “CMU10 Cell Voltage Sensor.” Verified applicability is the 2016 Mitsubishi i-MiEV sold in the US.

This page separates verified manufacturer/regulator evidence from supporting material. Unsupported causes, repairs or safety conclusions are not guessed.

Video guides

Watch Videos

Relevant videos play here without leaving this diagnostic page.

No sufficiently relevant embeddable video has been accepted for this diagnostic yet.

Videos are supporting material and never override OEM or regulator evidence.

1. What does Mitsubishi P1A7F mean?

P1A7F is identified in a Mitsubishi technical service bulletin as “CMU10 Cell Voltage Sensor.” Verified applicability is the 2016 Mitsubishi i-MiEV sold in the US.

2. Technical explanation

NHTSA-hosted Mitsubishi TSB-19-54-005 lists P1A7F as the diagnostic trouble code for the CMU10 Cell Voltage Sensor. The supplied excerpt states its trouble-judgment check conditions include three seconds after the electric motor switch is turned ON, or three seconds after the main drive lithium-ion battery starts charging. The excerpt is incomplete after an additional condition, so no further setting criteria are established by verified evidence.

3. What system is affected?

CMU10 Cell Voltage Sensor; the supplied evidence does not establish a broader system name.

4. How serious is this code?

Unknown. Severity is not established by the verified evidence.

5. Mitsubishi P1A7F symptoms you may notice

  • Not yet established by verified evidence.

6. Possible causes of Mitsubishi P1A7F

  • A CMU10 Cell Voltage Sensor DTC is identified by the verified bulletin. The underlying failure cause is not yet established by the supplied verified evidence.

7. Can I drive with Mitsubishi P1A7F?

Unknown. Whether the vehicle can be driven is not established by verified evidence.

8. Can I charge with Mitsubishi P1A7F?

Unknown. Whether the vehicle can be charged is not established by verified evidence.

9. What you can safely do

  • Have the vehicle assessed by a qualified Mitsubishi EV service provider.
  • Do not attempt high-voltage battery diagnosis, disassembly, or repair based on this information.

10. How to troubleshoot Mitsubishi P1A7F

  1. The verified bulletin identifies check conditions of three seconds after the electric motor switch is turned ON, or three seconds after the main drive lithium-ion battery starts charging.
  2. Further diagnostic steps are not yet established by the supplied verified evidence.

11. When to contact service

Service need is listed as unknown in the supplied diagnostic record. Because this DTC concerns a cell-voltage sensor identified in a main drive lithium-ion battery bulletin, qualified Mitsubishi EV service assessment is appropriate.

12. What the service center may check

  • Confirm whether P1A7F is present using suitable diagnostic equipment.
  • Review Mitsubishi TSB-19-54-005. Additional service checks are not established by the supplied excerpt.

13. Possible repair or resolution for Mitsubishi P1A7F

  • The supplied source summary includes the phrase “replace the main drive lithium-ion battery assembly,” but the provided excerpt does not establish the precise conditions under which that resolution applies to P1A7F. Do not treat battery replacement as confirmed for every occurrence of this code without the complete applicable bulletin procedure.

14. Affected vehicles

Not yet established by verified evidence.

15. Related TSBs / service bulletins

  • Mitsubishi TSB-19-54-005, published March 13, 2019; NHTSA Manufacturer Communication PDF 10158410: https://static.nhtsa.gov/odi/tsbs/2019/MC-10158410-9999.pdf

16. Recall information

  • Not yet established by verified evidence.

17. Official manufacturer information

Verified source coverage for this diagnostic is listed below. Open the cited document for the full manufacturer or regulator context.

19. Mitsubishi P1A7F frequently asked questions

What does Mitsubishi code P1A7F mean?

The verified Mitsubishi bulletin lists P1A7F as “CMU10 Cell Voltage Sensor.”

Which vehicle is verified for this code information?

The supplied applicability record verifies a 2016 Mitsubishi i-MiEV in the US.

When can the P1A7F trouble judgment occur?

The supplied bulletin excerpt states that check conditions include three seconds after the electric motor switch is turned ON, or three seconds after the main drive lithium-ion battery starts to charge.

Is it safe to drive or charge with P1A7F?

Not yet established by verified evidence.

Does P1A7F require battery replacement?

The source summary mentions replacement of the main drive lithium-ion battery assembly, but the supplied excerpt does not establish that battery replacement applies to every P1A7F occurrence.

20. Sources & verification

Verified

Evidence sources: 1 · Page reviewed 2026-10-12 · Editorial & quality policy