EV manufacturer

Tesla EV diagnostics

Explore Tesla diagnostic codes for Model 3, Model S and other verified model families. Review source-backed evidence and supported model applicability.

4 model families with verified coverage229 verified
Tesla Model 3 — representative Tesla EV/PHEV for diagnostic code coverageTesla Model 3

Models with verified diagnostic coverage

Verified Manufacturer-level verified records

These records passed the verified evidence gate. Model applicability is shown only where separately supported.

CP_a058CP_a058 means the Tesla has been unable to AC charge after too many unsuccessful attempts. Tesla’s documented message directs the owner to unplug and retry, or to try DC fast charging/Supercharging.CC_a030Tesla alert CC_a030 means charging is unavailable because paired Wall Connectors in a load-sharing (circuit-breaker-sharing) network have different maximum current capabilities. Tesla states that only Wall Connectors with the same maximum current capabilities can be paired.CP_a043CP_a043 is a Tesla alert indicating that one charge-port door sensor is not functioning normally. The charge port may be unable to accurately detect door position and may not operate as expected.VCSEC_a221VCSEC_a221 means the tire-pressure monitoring system (TPMS) detected that one or more tires is at least 20% below the recommended cold tire pressure. The alert does not itself indicate a flat tire. Check tire pressure and refill air as needed.CP_a079Tesla alert CP_a079 means the charge rate is reduced because the charge-port latch cannot secure the charge cable while cold ambient temperature is detected; the latch may be frozen. Tesla directs the owner to try the Defrost Car button in the mobile app.VCSEC_a228VCSEC_a228 means Tesla’s TPMS has detected that one or more tires is extremely low or flat. Pull over safely and check for a flat tire.CP_a056CP_a056 means charging stopped because the vehicle detected that the connection between the charge port and charge cable was unexpectedly interrupted. Tesla’s displayed instruction is: close the charge port, press the brake pedal, and retry.VCBATT_a180VCBATT_a180 means the electrical system cannot maintain the voltage required to support all vehicle features. Tesla documentation warns that, if the alert is present while driving, the vehicle may shut down unexpectedly.UMC_a015UMC_a015 means the Tesla Mobile Connector cannot communicate with its wall plug adapter. Charging current is automatically reduced to 8A. Tesla’s stated action is to fully plug the adapter into the Mobile Connector and retry.PCS_a016PCS_a016 means AC charging has stopped because the vehicle detected a condition preventing AC charging, with poor grid power quality possible. Tesla’s documented actions are to retry, try another charging location, or use Supercharging.UMC_a019Tesla alert UMC_a019 means the Mobile Connector reduced charge current after detecting a high temperature at the connection between the wall plug adapter and the Mobile Connector control box.APP_w218APP_w218 means Autosteer is unavailable because the vehicle exceeded the maximum speed limit for that driver-assistance feature. Take immediate control of the steering wheel or yoke and maintain control until reaching your destination.UMC_a018UMC_a018 means the Tesla Mobile Connector temporarily reduced charging current after detecting increased temperature in the charge handle connected to the vehicle charge port. Check that the connector is fully inserted and check the charge handle and charge port for debris.CP_a078Tesla alert CP_a078 means the charge-port latch cannot unlatch the connected charge cable while cold ambient temperature is detected. Tesla’s documented action is to fully reinsert the cable to remove strain, try unlatching again, and use the Defrost Car button in the Tesla mobile app if needed.VCBATT_a496VCBATT_a496 means: “Vehicle is preparing to shut down — PULL OVER SAFELY.” Verified Tesla owner-manual evidence states that the electrical system cannot provide adequate support to drive or continue driving, and the vehicle cannot be driven while the condition continues.DI_a245DI_a245 means Vehicle Hold is currently unavailable due to system constraints. When stopping, use and keep the brake pedal pressed to bring the vehicle to a complete stop and keep it stationary.DI_a190Tesla alert DI_a190 means the vehicle detected that the rear tires have worn more than the front tires by more than the recommended difference. It does not indicate a flat tire. Schedule service to have the tires inspected for rotation or replacement.CC_a007Tesla alert CC_a007 means charging is unavailable because the Wall Connector detected input voltage outside its permitted rating. Tesla documentation describes this as over- or under-voltage protection and directs the owner to consult an electrician regarding the circuit breaker serving the Wall Connector.CP_a010Tesla alert CP_a010 means the vehicle cannot charge because it cannot communicate effectively with the external charging equipment. Tesla states that it cannot sense a valid control-pilot signal from that equipment. Try charging again or use different charging equipment.CC_a003CC_a003 means the Tesla Wall Connector detected a ground fault and its GFCI protection tripped, so charging could not continue. Disconnect the Wall Connector from the vehicle and reconnect it. If the alert persists, Tesla directs users to consult an electrician or contact Tesla.CC_a022CC_a022 means charging is unavailable because more than one Tesla Wall Connector in a load-sharing (circuit-breaker-sharing) network is configured as the primary unit. The network requires exactly one primary Wall Connector.CC_a008Tesla alert CC_a008 means charging is unavailable because the Wall Connector input voltage is too low and must be within the Wall Connector rating. Tesla’s documented action is to consult an electrician to ensure appropriate voltage at the circuit breaker serving the Wall Connector.CP_a151Verified diagnostic recordBMS_a069BMS_a069 means the vehicle has detected that the high-voltage battery does not have enough energy remaining to support driving. Charge the vehicle now.CC_a024Tesla alert CC_a024 means charging is unavailable because the Wall Connector primary unit is set to too low a current. Verified information identifies an incorrect Wall Connector internal rotary-switch setting as the cause and directs that a qualified electrician set it to a valid operating-current setting.VCBATT_a191VCBATT_a191 means the low-voltage battery cannot provide the electrical support necessary to drive or continue driving. Tesla documentation states that the vehicle is shutting down to preserve energy for essential non-driving functions.CP_a066Tesla alert CP_a066 means charging cannot begin because the charging station is reporting that external charging equipment is not ready or that charging is not authorized.CC_a009Tesla alert CC_a009 means charging is unavailable because the Wall Connector input wiring is incorrectly installed. Verified documentation identifies a possible Line-and-Neutral swap and directs the owner to consult an electrician.CC_a013Tesla alert CC_a013 means charging is unavailable because over-temperature protection (latchoff) has activated for the charge handle/connection. Tesla directs the owner to check that the connector is fully inserted, uncovered, and away from a nearby heat source, and to check the charge handle or charge port for debris.CC_a027Tesla alert CC_a027 means the vehicle detected a Wall Connector hardware issue and charging may be unavailable. If the issue persists after the applicable Wall Connector installation-guide steps, the Wall Connector requires service.BMS_a067Tesla alert BMS_a067 means the vehicle detected a condition internal to the high-voltage battery that is limiting battery performance. The vehicle is OK to drive; if the alert persists, schedule service at your earliest convenience.CC_a010CC_a010 means Tesla detected a Wall Connector hardware issue and charging may be unavailable. The Wall Connector needs service.CC_a041Tesla alert CC_a041 means the Wall Connector detected high temperature at its building connection. Charging was reduced to protect the wiring and Wall Connector; the outlet or Wall Connector wiring must be checked.UMC_a008UMC_a008 means the Tesla Mobile Connector detected high temperature at the wall outlet/plug area and stopped charging to protect the outlet. Tesla documentation states this does not indicate an issue with the vehicle or Mobile Connector; it recommends wall-outlet and wiring inspection.CC_a026Tesla alert CC_a026 means the vehicle detected a Wall Connector hardware issue and charging may be unavailable. If the issue persists after the applicable Wall Connector installation guidance is followed and power is restored, the Wall Connector requires service.CP_a054Tesla alert CP_a054 means the charge-port latch cannot latch the charge cable in the charge-port inlet. Fully insert the cable and check for an obstruction. If the latch remains disengaged, AC charging is limited to 16 A and DC fast charging/Supercharging is not available.CC_a014Tesla alert CC_a014 means the Wall Connector detected an internal hardware issue and charging may be unavailable from that Wall Connector. Tesla’s published guidance says to ensure the connector is fully inserted, uncovered, and away from a heat source; if the issue persists below 100°F (38°C), service is required.PCS_a052Tesla alert PCS_a052 means AC charging cannot begin because the external charging equipment is not providing power. Check the power source or try different charging equipment. Verified Tesla documentation states that DC fast charging/Supercharging should still function as expected.DI_a185DI_a185 means Tesla Autopark aborted and the Electronic Parking Brake was applied.DI_a166DI_a166 means the Tesla automatically shifted into Park because it determined that the driver was leaving or was no longer present. Fasten the seatbelt and close the door to stay in gear.CC_a019Tesla alert CC_a019 means the vehicle detected a communication error between the Wall Connector and the vehicle and may be unable to charge. Disconnect and reconnect the Wall Connector, ensuring the charge handle is fully inserted. If the alert continues, Tesla states that service is required.CC_a016CC_a016 means the vehicle is unable to charge because of a vehicle-connection issue. Tesla’s documented instruction is to insert the charge handle fully into the charge port. The underlying documented condition is a communication error between the Wall Connector and the vehicle.CC_a004Verified diagnostic recordPCS_a019Tesla alert PCS_a019 means AC charging speed has been reduced because of a condition affecting AC charging. The verified guidance is to unplug and retry, or try a different charging location. DC fast charging/Supercharging should still function as expected.CC_a018Tesla alert CC_a018 means the vehicle detected a communication error between a Wall Connector and the vehicle. The displayed instruction is to insert the charge handle fully into the charge port.CC_a025CC_a025 means the Tesla detected a Wall Connector hardware issue and charging may be unavailable until the Wall Connector is serviced.CC_a043Tesla alert CC_a043 means the Wall Connector configuration is incomplete. The Wall Connector must be commissioned to configure the circuit-breaker size and protective-earth connection type before charging can be enabled.UMC_a013UMC_a013 means the Tesla Mobile Connector cannot communicate with its wall plug adapter. Charging current is automatically reduced to 8A because the connector cannot monitor adapter temperature. Unplug the Mobile Connector, fully insert the wall plug adapter, and retry charging.UMC_a010UMC_a010 means charging was interrupted because the Tesla Mobile Connector detected high temperature at the connection between its wall-plug adapter and control box. Let the connection cool, then ensure the wall-plug adapter is fully connected to the Mobile Connector.CP_a051Tesla alert CP_a051 means the charge-port door may not open when it is pressed. Verified Tesla owner-manual evidence states that one of the charge-port door sensors is not communicating properly. Use another usual method to open the charge-port door.UI_a137UI_a137 means a Tesla service technician is remotely logged into the vehicle for diagnosis or repair. Tesla’s published guidance says the alert itself does not indicate a vehicle issue.CC_a011CC_a011 means the Tesla Wall Connector has activated over-temperature protection (latchoff), so charging is unavailable until it cools. Ensure the Wall Connector is not covered and that no heat source is nearby. If the alert persists in ambient temperatures below 100°F (38°C), service is required.PCS_a073Tesla alert PCS_a073 means AC charging cannot begin because the vehicle detects a condition involving external charging equipment. Tesla’s documented instruction is to try different charging equipment. The supplied evidence states that DC fast charging/Supercharging should still function as expected.DI_a138DI_a138 means the front motor is unavailable. Tesla documentation states that power, speed, and acceleration may be reduced while the vehicle uses the rear motor(s) to continue driving.CC_a023CC_a023 means the Tesla has detected more than three Wall Connectors paired with the same primary Wall Connector in a load-sharing (circuit-breaker-sharing) network. The alert states that charging is unavailable.TAS2_a313TAS2_a313 means Tesla has detected an issue with the Adaptive Suspension Damping system. Real-time damping adjustments are unavailable and all dampers receive fixed current, so ride comfort may be reduced.CC_a028Tesla alert CC_a028 means charging is unavailable because the Wall Connector has an incorrect internal rotary-switch setting. Tesla’s published guidance is to have an electrician set it to a valid operating-current setting; if the issue remains afterward, the Wall Connector requires service.ESP_a118ESP_a118 means Tesla Hydraulic Fade Compensation is active. The vehicle detected reduced braking performance and temporarily activated brake assist intended to help provide full braking capability. To stop, keep the brake pedal firmly pressed.UMC_a005Tesla alert UMC_a005 means charging cannot begin or is interrupted because the Mobile Connector detects insufficient supply voltage from the wall outlet or an unexpected voltage drop. Tesla’s documented action is to try a different wall outlet.CP_a046Tesla alert CP_a046 means charging stopped because communication between the vehicle and the external charging equipment was interrupted. Tesla states that this alert is usually specific to the external charging equipment and power source and does not typically indicate a vehicle issue.DI_a175Tesla alert DI_a175 means Cruise Control, including Traffic-Aware Cruise Control, is currently unavailable.UI_a006Tesla UI_a006 means “Service is required — Schedule service now.” Tesla states that it is set remotely when a condition requiring service is detected. Schedule Tesla service; additional information should be available when service is scheduled.CP_a143CP_a143 means charging is unavailable because the vehicle detected an electric arc-flash hazard in a third-party adapter used to connect a CCS charge handle to the vehicle charge port. Use different charging equipment.CP_a055Tesla alert CP_a055 means charging stopped because communication between the vehicle and external charging equipment was interrupted. Tesla documentation says this is usually specific to the external charging equipment or power source and does not typically indicate a vehicle issue.APP_w222Tesla alert APP_w222 means Traffic-Aware Cruise Control and Autosteer are unavailable because one or more front cameras is blocked or blinded by external conditions.VCBATT_a402VCBATT_a402 means the low-voltage battery—the electrical system’s backup power source—is unavailable or cannot provide enough voltage for all vehicle features. The vehicle will consume more energy while idle. If the alert remains present, Tesla documentation recommends scheduling service immediately.UMC_a011UMC_a011 means the Tesla cannot charge because it cannot communicate effectively with the Mobile Connector. The Mobile Connector cannot confirm through proximity detection that the charge handle is fully connected to the vehicle.BMS_a068BMS_a068 means the vehicle has detected a condition internal to the high-voltage battery that is limiting battery performance. Tesla documentation states that acceleration and charging performance are reduced.DI_a250Verified diagnostic recordUMC_a009UMC_a009 means charging was interrupted because the Tesla Mobile Connector detected a high temperature in the charge handle connected to the vehicle charge port. Tesla’s documented instruction is to ensure the Mobile Connector is fully inserted and to check the charge handle and charge port for debris.UMC_a014UMC_a014 means the Tesla Mobile Connector cannot communicate with its wall plug adapter. Charging current is automatically reduced to 8 A. Fully insert the wall plug adapter into the Mobile Connector and retry.VCBATT_a182Tesla alert VCBATT_a182 means the low-voltage battery is showing degraded performance and needs replacement. Vehicle software updates will not complete until the battery is replaced. Schedule Tesla service for low-voltage-battery replacement.CC_a005Tesla alert CC_a005 means charging could not proceed because the Wall Connector GFCI tripped. Tesla’s published description identifies a ground fault and instructs the owner to disconnect and reconnect the Wall Connector, or use different charging equipment.CC_a020CC_a020 means the Tesla detected an internal Wall Connector hardware issue and charging may be unavailable through that Wall Connector. Tesla documentation says the Wall Connector needs service if the issue persists.APP_w221Tesla alert APP_w221 means Traffic-Aware Cruise Control and Autosteer are unavailable because the front-bumper radar has no or low visibility. Verified examples of a temporary obstruction include snow, ice, dirt, or mud.UMC_a016Tesla alert UMC_a016 means the Mobile Connector detected increased temperature inside its control-box housing and temporarily reduced charge current.APP_w304APP_w304 means one or more Tesla vehicle cameras has limited or no visibility because it is blocked or blinded by external conditions. Clean the camera or wait for visibility to return; some or all Autopilot features may be temporarily unavailable.APP_w207Tesla alert APP_w207 means Autosteer is temporarily unavailable.UMC_a012UMC_a012 means the vehicle cannot charge because it cannot communicate effectively with the Tesla Mobile Connector. Tesla’s documentation states that the Mobile Connector has detected it cannot generate or maintain a valid control-pilot signal. Try charging again or use different charging equipment.PCS_a053Tesla alert PCS_a053 means charging speed has been reduced because the onboard charger detected a large voltage drop during charging. Tesla identifies building wiring or wall-outlet problems and use of an extension cord as likely causes.PCS_a017Tesla alert PCS_a017 means charging stopped because power was lost during charging. Verified Tesla owner-information evidence says the loss may be from the charging equipment’s power source, such as a wall outlet, or from the charging equipment itself.PCS_a032Tesla alert PCS_a032 means poor electric grid power quality was detected. AC charging speed may be reduced or AC charging may be interrupted. Try a different charging station or location.CC_a021Verified diagnostic recordCP_a004Tesla alert CP_a004 means the charge port cannot detect whether a charge cable is inserted or identify the connected cable type. Tesla documentation states this is usually specific to external charging equipment and power sources, rather than the vehicle.VCBATT_a220VCBATT_a220 means the Tesla low-voltage battery cannot provide the electrical support necessary to drive or continue driving. Tesla documentation states that the vehicle may shut down unexpectedly and may not restart after the current drive. Schedule service.CC_a002Tesla alert CC_a002 means charging is unavailable because a ground fault has been detected: current may be leaking through an unsafe path. Disconnect and reconnect the Wall Connector once; if the alert remains, use different charging equipment and have the Wall Connector installation inspected by an electrician.UMC_a004UMC_a004 means the Tesla Mobile Connector detected wall-outlet voltage that is too high or an unexpected increase in supply voltage. Charging may be unavailable or interrupted. Tesla’s documented action is to try a different wall outlet.VCFRONT_a192VCFRONT_a192 means the electrical system cannot support all vehicle features, so the vehicle is shutting down nonessential features to preserve energy for essential functions. If the alert remains present, Tesla’s owner-manual material recommends scheduling service immediately.APP_w224Tesla alert APP_w224 means Traffic-Aware Cruise Control and Autosteer are unavailable because the vehicle cameras are not fully calibrated. Continue driving to allow calibration to complete. Verified Tesla/NHTSA material states the vehicle is OK to drive in the meantime.PCS_a090PCS_a090 means AC charging has slowed because the onboard charger detected that one or more AC phases are not powered. Tesla documentation states that DC fast charging/Supercharging should still function as expected.UMC_a007UMC_a007 means charging was interrupted because the Tesla Mobile Connector detected a high temperature inside its control-box housing. Let the Mobile Connector cool before charging resumes.UMC_a001UMC_a001 means the Tesla Mobile Connector detected insufficient grounding at the electrical outlet. Tesla’s documentation says to try another outlet.TAS2_a314TAS2_a314 means Tesla has detected an issue with the Adaptive Suspension Damping system. Real-time suspension adjustments for ride and handling are unavailable, and the ride may be softer than usual.CP_a053Tesla alert CP_a053 means charging cannot begin because the charging equipment is not ready: the vehicle detects a charge handle, but the charging station is not communicating with the vehicle. Check the charging station’s power source or try a different station.CC_a001Tesla alert CC_a001 means the Wall Connector detected no ground connection, so charging is unavailable until proper wiring or outlet grounding is verified.UMC_a002Tesla alert UMC_a002 means charging cannot continue because the ground-fault circuit interrupter (GFCI) in the Mobile Connector has tripped. Unplug the charge handle from the vehicle charge port and retry charging.CC_a029Tesla alert CC_a029 means charging is unavailable because a communication error occurred between the Wall Connector and the vehicle. The verified instruction is to disconnect the Wall Connector from the vehicle and reconnect it, ensuring the charge handle is fully inserted.PCS_a054Tesla alert PCS_a054 means charging was interrupted because the vehicle’s onboard charger detected an unusually large voltage drop. Tesla’s documented guidance is to remove extension cords and have the building wiring inspected.CP_a101Tesla alert CP_a101 means a high temperature was detected at the Wall Connector’s building connection. Charging is slowed to protect the wiring and Wall Connector, and the outlet or Wall Connector wiring must be checked.UMC_a017UMC_a017 means the Tesla Mobile Connector detected high temperature at the wall plug/outlet and reduced charging rate to protect the outlet. Tesla recommends inspection of the wall outlet and wiring.DI_a184DI_a184 means Tesla Autopark has been canceled and the driver must take control of the vehicle.CC_a015CC_a015 is a Tesla charging alert: “Unable to charge - Vehicle connection issue Insert charge handle fully into charge port.” Verified Tesla documentation states that a communication error occurred between the Wall Connector and the vehicle.CC_a006CC_a006 means the Wall Connector’s overcurrent protection has activated and charging is unavailable. Tesla’s documented action is to reduce the vehicle charge-current setting; if the issue persists, service is required. The alert also advises disconnecting and retrying or using different equipment.CP_a102Tesla alert CP_a102 means a high temperature was detected at the Wall Connector’s building connection. Charging is slowed to protect the wiring and Wall Connector; the supplied official information directs the owner to have an electrician inspect the building wiring connection.CC_a017CC_a017 means the Tesla detected a communication error between the Wall Connector and the vehicle. Reconnect the charge handle fully into the charge port and try charging again. If the alert persists, verified owner-manual evidence says service is required.APP_w048Tesla alert APP_w048 means Autopilot features are currently unavailable. The alert states that features may be restored on the next drive.BMS_a066Tesla alert BMS_a066 means the vehicle detected an internal high-voltage-battery condition that limits battery performance. Maximum charge level and driving range may be reduced. Tesla states that service is required to restore full performance and that the vehicle is OK to drive in the meantime; schedule service soon.CHG_f083Tesla alert CHG_f083 means charging power was lost and poor grid power quality is possible. Retry charging, use another charge location, or use Supercharging.CC_f010CC_f010 means the Tesla Wall Connector detected an internal hardware issue and charging may be unavailable. Tesla’s documented action is to have the Wall Connector serviced by an electrician.CP_w054CP_w054 means the charge-port latch is unable to latch the charge cable in the charge-port inlet. Fully insert the charge cable or check for an obstruction.CHG_f035CHG_f035 means the vehicle cannot charge because it cannot communicate effectively with the external charging equipment. Tesla’s documented advice is to try charging again or use different charging equipment.UMC_w011Tesla alert UMC_w011 means the vehicle cannot charge because it cannot communicate effectively with the Mobile Connector. The connector cannot confirm through proximity detection that the charge handle is fully connected to the vehicle.CC_f005Tesla alert CC_f005 means the Wall Connector GFCI has tripped and charging is unavailable. Verified guidance is to disconnect and reconnect the Wall Connector, or use different charging equipment. If it persists, the Wall Connector requires service.CP_w043Tesla alert CP_w043 indicates that one charge port door sensor is not functioning normally. The charge port may be unable to accurately sense the door position and may not operate as expected.CC_f029Tesla alert CC_f029 means a communication error occurred between the Wall Connector and the vehicle. The documented first action is to disconnect the Wall Connector from the vehicle and reconnect it, ensuring the charge handle is fully inserted into the charge port.UMC_w013Tesla alert UMC_w013 means the Mobile Connector cannot communicate with its wall plug adapter. Charging current is automatically reduced to 8A because adapter temperature cannot be monitored. Tesla’s instruction is to fully plug the adapter into the Mobile Connector and retry.CC_f017CC_f017 indicates that a communication error occurred between the Tesla Wall Connector and the vehicle. Disconnect the Wall Connector from the vehicle and reconnect it, ensuring the charge handle is fully inserted. If the alert persists, verified owner-manual evidence says service is required.UMC_w002Tesla alert UMC_w002 means the vehicle cannot charge because the ground-fault circuit interrupter (GFCI) in the Mobile Connector has tripped. Unplug the charge handle from the vehicle charge port and retry.UMC_w007UMC_w007 means charging was interrupted because the Tesla Mobile Connector detected a high temperature inside its control-box housing. Let the Mobile Connector cool before attempting to resume charging.CHG_u004Tesla alert CHG_u004 means charging stopped because power was lost during charging. Verified documentation says to check the power source and charging equipment.BMS_u006BMS_u006 means Tesla has detected that the high-voltage battery does not have enough energy remaining to support driving. The vehicle will be unable to drive or continue driving until it is charged. If the alert appears while driving, pull over safely.TAS_a313TAS_a313 means the Tesla Adaptive Suspension Damping system has an issue. Real-time damping adjustment is unavailable, and ride comfort may be reduced. Tesla/NHTSA owner-documentation evidence recommends scheduling service at the earliest convenience.CC_f018CC_f018 means the vehicle detected a communication error between the Wall Connector and the vehicle. Disconnect and reconnect the charge handle, ensuring it is fully inserted. If the alert continues, verified owner documentation says service is required.CC_f009Tesla alert CC_f009 means charging is unavailable because the Wall Connector input wiring is incorrectly installed. Verified Tesla documentation identifies a possible Line/Neutral swap and directs the owner to consult an electrician.BMS_u030BMS_u030 means charging is unavailable because the vehicle detected an electric arc-flash hazard in a third-party adapter used to connect a CCS charge handle to the Tesla charge port. Use different charging equipment.CC_f001Tesla alert CC_f001 means the vehicle detected no ground connection in the Wall Connector and charging is unavailable until proper wiring or outlet grounding is verified.DI_u025DI_u025 means Autopark aborted. Tesla documentation states that Autopark has stopped and the Electronic Parking Brake has been applied. Park or finish parking manually; Autopark should be available again during the next drive.DI_w168DI_w168 means Vehicle Hold is currently unavailable due to system constraints. When stopped, use and keep the brake pedal pressed to hold the vehicle stationary. Tesla/NHTSA material states the vehicle is OK to drive in the meantime; schedule service if the alert continues through subsequent drives.CC_f007CC_f007 means the Tesla detected over- or under-voltage protection related to the Wall Connector input. Charging is unavailable until the Wall Connector supply voltage is within its rating. Tesla’s guidance is to consult an electrician to verify the voltage on the circuit breaker serving the Wall Connector.UMC_w016Tesla alert UMC_w016 means the Mobile Connector detected increased temperature inside its control-box housing and has temporarily reduced charge current.DI_w172DI_w172 means Tesla detected an issue in the powertrain system: excessive backlash (lash) between the drive unit and the wheels. Tesla states that excessive lash indicates mechanical wear and that a powertrain inspection is needed. Avoid hard acceleration.THC_u0005Tesla alert THC_u0005 means cabin air-conditioning performance has been temporarily reduced while the vehicle prioritizes cooling the high-voltage battery and/or powertrain. Verified Tesla owner-manual evidence describes this as completely normal and not an indication of a vehicle or air-conditioning problem.CC_f041Tesla alert CC_f041 means the Wall Connector detected high temperature at its building connection and reduced charging to protect the wiring and Wall Connector. The outlet or Wall Connector wiring must be checked.CHG_u005CHG_u005 means charging cannot begin because the charging equipment is not ready. The vehicle detects a charge handle, but the charging station is not communicating with the vehicle. Tesla’s alert instructs the driver to check the power source or try a different station.THC_w0100THC_w0100 means the vehicle detected a condition affecting high-voltage battery-heater performance. Charging speed may be reduced, and charging may be unavailable in cold temperatures.CC_f026Tesla alert CC_f026 means charging is unavailable because the Wall Connector detected an internal hardware issue and may need service.CC_f011Verified diagnostic recordUMC_w004UMC_w004 means the vehicle cannot charge, or charging was interrupted, because the Mobile Connector detected wall-outlet voltage that was too high or an unexpected increase in supply voltage. Try a different wall outlet.MCU_w010Tesla alert MCU_w010 means the TPMS has detected that one or more tires are at least 20% below the recommended cold tire pressure. It does not, by itself, indicate a flat tire. Check and refill tire pressure as needed.CC_f006CC_f006 means the Tesla Wall Connector has triggered overcurrent protection and charging is unavailable. Tesla’s documented action is to reduce the vehicle’s charge-current setting; if the alert persists, service is required.CC_f008Tesla alert CC_f008 means charging is unavailable because the Wall Connector input voltage is too low and must be within the Wall Connector rating.UMC_w015UMC_w015 means the Tesla Mobile Connector cannot communicate with its wall plug adapter. Charging current is automatically reduced to 8 A. Fully insert the plug adapter into the Mobile Connector and retry.CC_f003CC_f003 means the Wall Connector’s ground-fault circuit interrupter (GFCI) has tripped, so charging cannot proceed with that equipment. Disconnect and reconnect the Wall Connector; if it persists, use different charging equipment or consult an electrician/Tesla.DI_f138DI_f138 means the front motor is unavailable. Tesla documentation states that the vehicle can continue driving using the rear motor(s), but power, speed, and acceleration may be reduced.DI_w138Verified diagnostic recordCHG_u012CHG_u012 indicates that AC charging speed has been reduced by a condition affecting AC charging. Tesla’s documented action is to unplug and retry, or try a different charging location.DI_u032DI_u032 means Adaptive Suspension Damping has an issue and adaptive ride control is disabled. Verified Tesla owner-manual evidence states vehicle speed is limited to 90 mph (144 km/h), and the ride may be softer than usual.CC_f030Tesla alert CC_f030 means charging is unavailable because paired Wall Connectors in a load-sharing (circuit-breaker-sharing) network have different maximum current capabilities. Only Wall Connectors with matching maximum current capabilities can be paired.CHG_u006CHG_u006 means the charge-port latch cannot latch the charge cable in the inlet. Fully insert the charge cable or check for an obstruction.CC_f015Tesla alert CC_f015 means charging is unavailable because a communication error occurred between the Wall Connector and the vehicle. Disconnect the Wall Connector from the vehicle and reconnect it, ensuring the charge handle is fully inserted.CHG_u001CHG_u001 means the vehicle reduced charging speed after its onboard charger detected a large voltage drop during charging. Tesla’s documented instruction is to remove extension cords and have the building wiring inspected.CHG_u010CHG_u010 means AC charging cannot begin because the vehicle detects input voltage at the charge port when it should not. Tesla directs the driver to try different charging equipment. DC fast charging/Supercharging should still function as expected.GTW_w360GTW_w360 means Tesla’s Hydraulic Fade Compensation is active. It temporarily assists braking when the vehicle detects reduced brake performance. To stop, keep the brake pedal firmly pressed.DI_w039Tesla alert DI_w039 means regenerative braking performance is temporarily reduced, so the vehicle provides less automatic deceleration when the accelerator is released. Use the brake pedal as needed.CC_f023CC_f023 means the Wall Connector load-sharing network has more than three Wall Connectors paired with the same primary unit, preventing charging.CC_f004Verified diagnostic recordMCU_w029Tesla alert MCU_w029 means: “Service is required — Schedule service now.” Verified Tesla owner-manual evidence states that Tesla sets this alert remotely when it detects a condition requiring service. Schedule service through the Tesla Mobile App; additional information should be available when service is scheduled.UMC_w017Tesla alert UMC_w017 means the Mobile Connector detected that the wall outlet/plug area is becoming too warm and reduced charging rate to protect the outlet. Tesla recommends wall-outlet and wiring inspection.CC_f022CC_f022 means the Wall Connector load-sharing network has more than one unit configured as primary. Tesla’s documented correction is to have an electrician verify that exactly one Wall Connector is primary and every other linked Wall Connector is in paired position (position F).CC_f002Verified diagnostic recordDI_u024DI_u024 means Autopark has been canceled and the driver must take control of the vehicle.UMC_w019Tesla alert UMC_w019 means charging current was reduced because the Mobile Connector detected high temperature at the connection between its wall-plug adapter and control box.CHG_u013CHG_u013 means charging stopped because communication between the Tesla and the external charging equipment was interrupted. Verified Tesla documentation says this alert is usually specific to external charging equipment and power sources and does not typically indicate a vehicle issue.TAS_a314Verified diagnostic recordUMC_w012Tesla alert UMC_w012 means the vehicle cannot charge because it cannot communicate effectively with the Mobile Connector. The Mobile Connector has detected that it cannot generate or maintain a valid control-pilot signal. Tesla’s alert wording advises trying again or using different equipment.UMC_w018Tesla alert UMC_w018 means charging current has been temporarily reduced because the Mobile Connector detected increased temperature in the handle connected to the vehicle charge port. Check that the Mobile Connector is fully inserted and check the charge handle and charge port for debris.GTW_w174Tesla alert GTW_w174 means the low-voltage (12V) battery is showing degraded performance and needs replacement. Tesla states that vehicle software updates will not complete until the battery is replaced.UMC_w008UMC_w008 means the Tesla Mobile Connector detected that the wall outlet/plug area was becoming too warm and stopped charging to protect the outlet. Tesla’s documented recommendation is wall-outlet and wiring inspection.CC_f025Tesla alert CC_f025 means charging is unavailable because the Wall Connector detected an internal hardware issue and needs service.CHG_u002CHG_u002 means charging was interrupted because the vehicle’s onboard charger detected an unusually large voltage drop. Tesla’s documented guidance is to remove extension cords and have the building wiring and/or wall outlet inspected.CHGS_f083CHGS_f083 indicates that power was lost during charging. Tesla documentation says this may be due to the charging equipment losing source power, such as from a wall outlet, or an issue with the charging equipment. Retry charging, use another charge location, or use Supercharging.UMC_w009UMC_w009 means charging was interrupted because the Tesla Mobile Connector detected a high temperature in the charge handle that connects to the vehicle charge port. Tesla’s documented instruction is to ensure the Mobile Connector is fully inserted and to check the charge handle and charge port for debris.GTW_w405GTW_w405 means the electrical system cannot maintain the voltage required to support all vehicle features. Tesla documentation states that, if the alert occurs while driving, the vehicle may shut down unexpectedly and may not restart after stopping.CC_f027Tesla alert CC_f027 means charging is unavailable because the Wall Connector has detected a hardware issue and may need service.CC_f021CC_f021 means charging is unavailable because a Tesla Wall Connector load-sharing network does not have an available primary Wall Connector. Tesla’s documented requirement is one—and only one—Wall Connector configured as primary.GTW_w017GTW_w017 means the vehicle has reduced electrical power and may limit non-essential features. Verified Tesla owner-documentation evidence says seat heaters and cabin heating/cooling may be unavailable or operate at a reduced level to preserve electrical power for essential functions.GTW_w018Tesla alert GTW_w018 means electrical-system power has been reduced, so non-essential features may be unavailable or operate at a reduced level. Verified examples include seat heaters and cabin heating/cooling.DI_u006DI_u006 means the Tesla automatically shifted into Park because it determined the driver was leaving or was no longer present. The alert instructs the driver to fasten the seatbelt and close the door to stay in gear.UMC_w014UMC_w014 means the Tesla Mobile Connector cannot communicate with its wall plug adapter. Charging current is automatically reduced to 8A. Fully insert the wall plug adapter into the Mobile Connector and retry.CHG_w037CHG_w037 means the Wall Connector detected high temperature at its building connection. Charging has been slowed to protect the wiring and Wall Connector; the outlet or Wall Connector wiring must be checked.UMC_w005UMC_w005 means the Tesla Mobile Connector cannot charge, or charging was interrupted, because it detected insufficient wall-outlet supply voltage or an unexpected voltage drop. Try a different wall outlet.CC_f019CC_f019 means the Tesla detected a communication error between the Wall Connector and the vehicle. Disconnect the Wall Connector from the vehicle and reconnect it, ensuring the charge handle is fully inserted. If the alert persists, verified guidance states that service is required.UMC_w010UMC_w010 means charging was interrupted because the Tesla Mobile Connector detected a high temperature at the connection between its wall-plug adapter and control box. Let the equipment cool, then ensure the wall-plug adapter is fully connected to the Mobile Connector.CHG_w032CHG_w032 means a Wall Connector detected high temperature at its building connection. Charging is reduced to protect the wiring and Wall Connector, and the outlet or Wall Connector wiring must be checked.CC_f024Tesla alert CC_f024 means charging is unavailable because the Wall Connector primary unit’s current setting is too low. Verified evidence identifies an incorrect Wall Connector internal rotary-switch setting as the cause.CC_f014CC_f014 means the Tesla Wall Connector detected an internal hardware issue and charging may be unavailable from that Wall Connector. The official guidance is to have the Wall Connector serviced.CC_f013Tesla alert CC_f013 means charging is unavailable because over-temperature protection (latchoff) has activated for the charge handle. Tesla instructs the owner to check that the connector is fully inserted, uncovered, and away from a nearby heat source.UMC_w001UMC_w001 means the Tesla Mobile Connector detected insufficient grounding at the electrical outlet. Tesla documentation says this is likely due to an inadequate or missing ground connection and does not indicate a problem with the vehicle or Mobile Connector. Try another outlet.CC_f016Tesla alert CC_f016 means charging is unavailable because a communication error occurred between the Wall Connector and the vehicle. Insert the charge handle fully, then disconnect and reconnect it. If the alert persists, Tesla’s published guidance says service is required.CC_f028CC_f028 means charging is unavailable because the Tesla Wall Connector has an incorrect internal rotary-switch setting. A qualified electrician should adjust it to a valid operating-current setting using the Wall Connector Installation Manual. If the issue continues afterward, the Wall Connector requires service.CHG_f091CHG_f091 means the charge port cannot determine whether a charge cable is inserted or identify the type of connected cable. Tesla documentation states that this alert is usually related to external charging equipment or its power source and does not typically indicate a vehicle issue.MCU_u019MCU_u019 means a Tesla service technician is remotely logged into the vehicle for diagnosis or repair. The verified owner-manual evidence states that this alert does not indicate a vehicle issue.CC_f020CC_f020 means the Tesla detected a Wall Connector hardware issue and charging may be unavailable from that Wall Connector. Tesla documentation directs using other available charging equipment to determine whether the vehicle communicates with it; if the issue persists, service is required.DI_u015Tesla alert DI_u015 means Cruise Control, including Traffic-Aware Cruise Control, is currently unavailable.BMS_u018BMS_u018 means the vehicle detected a condition internal to the high-voltage battery that limits battery performance. Maximum charge level and driving range are reduced. Tesla’s documented instruction is to schedule service if the alert persists.MCU_w008Tesla alert MCU_w008 means the tire-pressure monitoring system (TPMS) has detected one or more tires that are extremely low or flat. The alert instructs: “PULL OVER SAFELY - Check for flat tire.”CHG_u014CHG_u014 means charging was interrupted because external charging equipment reported a fault that prevents charging. Check the charging equipment for its displayed error code or message.CHG_u007CHG_u007 means charging was interrupted because the external charging equipment reported a fault that prevents charging. Check the charging equipment for its own error code or message.EPBR_a195EPBR_a195 means the Tesla automatically shifted into Park because it determined the driver was leaving or no longer present. The supplied Tesla manual evidence describes this as expected behavior in various circumstances. Fasten the seatbelt and close the door to stay in gear.VCFRONT_a191Tesla alert VCFRONT_a191 means the low-voltage battery cannot provide the electrical support needed to drive or continue driving. The vehicle is shutting down to preserve energy for essential non-driving functions.EPBL_a195EPBL_a195 means the Tesla automatically shifted into Park because it determined the driver was leaving or was no longer present. Verified Tesla documentation describes this as expected behavior under various circumstances. Fasten the seatbelt and close the door to stay in gear.VCFRONT_a220Tesla alert VCFRONT_a220 means the low-voltage battery is not available and cannot provide electrical support for vehicle features. Tesla’s owner documentation says the vehicle may shut down unexpectedly and may not restart after the current drive; schedule service.VCFRONT_a182VCFRONT_a182 means the Tesla low-voltage battery is showing degraded performance and needs replacement. Vehicle software updates will not complete until the battery is replaced. Schedule Tesla service immediately.VCFRONT_a180Tesla alert VCFRONT_a180 means the electrical system cannot maintain the voltage required to support all vehicle features. Tesla documentation states that, if the alert is present while driving, the vehicle may shut down unexpectedly.VCFRONT_a402Verified diagnostic recordVCFRONT_a596Tesla alert VCFRONT_a596 means an abnormally large, sustained power draw has left the electrical system unable to support all features and functions. While the alert is present, the vehicle is unable to drive and will not restart.VCFRONT_a496VCFRONT_a496 means the electrical system cannot adequately support driving or continued driving. Pull over safely: the vehicle is preparing to shut down to preserve energy for essential non-driving functions.UI_a013UI_a013 means Tesla’s TPMS has detected one or more tires with air pressure significantly below the recommended cold tire pressure; the tire may be extremely low or flat. Pull over safely and check for a flat tire.UI_a014Tesla alert UI_a014 means the TPMS has detected that one or more tires is at least 20% below the recommended cold tire pressure. It does not by itself indicate a flat tire. Check pressure and refill air as needed.VCFRONT_a592Tesla alert VCFRONT_a592 means an abnormally large, sustained power draw has left the electrical system unable to support all vehicle features and functions. While the alert is present, the vehicle is unable to drive and will not restart.VCFRONT_a597VCFRONT_a597 means an abnormally large, sustained power draw has left the vehicle’s electrical system unable to support all features and functions. While the alert is present, the vehicle is unable to drive and will not restart.VCFRONT_a216VCFRONT_a216 means Tesla detected an abnormally large, sustained power draw while driving or during Supercharging/DC fast charging. The electrical system may be unable to support all features and functions, and the vehicle may not restart until the electrical system has been restored.VCFRONT_a593Verified diagnostic recordUI_a004UI_a004 means the vehicle detected that the front trunk (hood) is open while driving, or that it cannot confirm the front trunk primary and/or secondary latch is fully secured.MCU_u005MCU_u005 means the vehicle detected the front trunk (hood) as open while driving, or could not confirm that at least one front-trunk latch was fully secured. Proceed with caution and schedule service immediately if the alert remains active.BMS_u031BMS_u031 means a fuse in the high-voltage battery is very near the end of its lifetime and requires replacement. Tesla’s owner documentation states that it is OK to drive and recommends scheduling service as soon as possible for high-voltage battery fuse replacement.APP_w009Tesla alert APP_w009 means Automatic Emergency Braking (AEB) is unavailable for the remainder of the current drive and may be restored on the next drive.BMS_u032Tesla alert BMS_u032 means a fuse in the high-voltage battery is very near the end of its lifetime and requires replacement. Tesla documentation states that the vehicle is OK to drive in the meantime, but service should be scheduled as soon as possible.BMS_w176BMS_w176 means a fuse in the high-voltage battery is at the end of its lifetime and needs replacement. Tesla documentation says the vehicle is OK to drive, but service should be scheduled immediately; continue only to your immediate destination. Reduced speed and acceleration may occur.PMRER_a092PMRER_a092 is a Tesla powertrain alert stating that the powertrain requires service. The condition may persist even if functionality returns. Tesla documentation says power, speed, and acceleration may be reduced, and the vehicle may need to shut down while driving.DIRER_a251DIRER_a251 means the vehicle detected a condition requiring gearbox fluid inspection. Tesla documentation recommends scheduling service. The vehicle is stated to be OK to drive with the alert present, but prolonged driving with the alert may result in damage not established further by the supplied evidence.DIREL_a251DIREL_a251 means the vehicle has detected a condition requiring gearbox fluid inspection. Tesla recommends scheduling service. Verified owner-manual evidence states the vehicle is OK to drive with this alert present, but warns against continuing to drive with it for an extended period.DIF_a251DIF_a251 means the vehicle detected a condition requiring gearbox fluid inspection. Tesla documentation recommends scheduling service; the vehicle is OK to drive with the alert present, but it should not be left unaddressed for an extended period.PMR_a092PMR_a092 means Tesla has detected a powertrain condition requiring service. The condition may persist even if functionality returns.PMREL_a092PMREL_a092 is a Tesla powertrain alert stating that the powertrain requires service. The condition may persist even if functionality is restored; schedule service.PMF_a092PMF_a092 is a Tesla powertrain service alert. Official Tesla owner-documentation material filed with NHTSA states that the vehicle’s powertrain requires service and that the condition may persist even if functionality returns.DIR_a251DIR_a251 means the vehicle detected a condition requiring gearbox fluid inspection. Tesla documentation recommends scheduling service; the vehicle is OK to drive with this alert present, but it should not be ignored for an extended period.PM_a092PM_a092 indicates that the Tesla powertrain requires service. Tesla’s owner-manual communication warns that power, speed, and acceleration may be reduced and that the vehicle may need to shut down while driving. Schedule service.CP_a164CP_a164 means the vehicle still detects the charge handle after an unlatch request. The verified owner-manual communication says to use the charge port manual release cable if needed.